Skip to main navigation menu Skip to main content Skip to site footer

Vol. 12 No. 06 (2025)
International Multidisciplinary Journal for Research & Development

Articles

KINEMATICS AND MAIN DIMENSIONS OF SPUR GEAR CYLINDRICAL GEARS

Published 2025-06-13

  • Tovashov Rustam Xo‘jaxmat ugli

Tovashov Rustam Xo‘jaxmat ugli
Doctor of Philosophy in technical Sciences, docent, Karshi State Technical University

Abstract

This article presents theoretical information on the kinematics of spur gear cylindrical gears, their main dimensions, and the forces acting on them, which are commonly used in the field of mechanics.

Keywords

gear wheel, gear, parameters, diameter, forces, kinematics, speed, tooth module, number of teeth, outer, inner circle.

DOWNLOAD PDF

References

  1. Mamatov F. et al. Machine for cultivation and sowing of cereal seeds on sloping fields //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2612. – №. 1.
  2. Mahamov K. Т., Tovashov R. K., Ochilov S. U. Part of the soil surface with minimal tillage analysis of lateral suction techniques and technologies //Academicia: An International Multidisciplinary Research Journal-Kurukshetra. – 2020. – №. 10 (4). – С. 706.
  3. Товашов Р. Х. и др. НИШАБЛИКЛАРГА ИШЛОВ БЕРИШ ВА ЭКИШ СЕЯЛКАСИ АРИҚ ОЧГИЧНИНГ ТАЖРИБАВИЙ ТАДҚИҚОТЛАРИ НАТИЖАЛАРИ //Инновацион технологиялар. – 2021. – №. Спецвыпуск 1. – С. 105-108.
  4. Kh T. R. Theoretical basis of the crushing angle of the loosening working body blades of the combined machine //Инновационная наука. – 2020. – №. 10. – С. 23-25.
  5. Tovashov R. K. Theoretical basis of the installation corner in relation to the direction of movement of the furrow opener working body of the combined machine //РАЗВИТИЕ НАУКИ И ТЕХНИКИ: МЕХАНИЗМ ВЫБОРА И РЕАЛИЗАЦИИ ПРИОРИТЕТОВ. – 2020. – С. 26.
  6. Mamatov F. et al. Working body of the machine for sowing cereals on slopes //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2612. – №. 1.
  7. Mamatov F. et al. Ridge forming machine for sowing cereals on sloping fields //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 401. – С. 04051.
  8. Маматов Ф. М., Махамов Х. Т., Товашов Р. Х. Нишаб ерларга ишлов берадиган машина юмшаткичининг тажрибавий тадқиқотлари натижалари //Инновацион технологиялар. – 2021. – №. 1 (41). – С. 27-30.
  9. Maxamov ХТ Т. R. Х. Tavashov Sh. X., Safarov FS Theoretical basis of the parameters of the base of antique chairs //International Journal of Trend in Scientific Research and Development (IJTSRD), India. – 2022. – Т. 6. – №. 2. – С. 1213-1217.
  10. Tovashov R. Нишаб ерларга ишлов берадиган машина корпусининг тажрибавий тадқиқотлари натижалари //Science and innovation. – 2022. – Т. 1. – №. A6. – С. 411-415.
  11. Товашов Р. Х., Товашов Б. Р. Результаты экспериментальных исследований рыхлителя сеялки //ИНТЕЛЛЕКТУАЛЬНЫЙ ПОТЕНЦИАЛ ОБЩЕСТВА КАК ДРАЙВЕР ИННОВАЦИОННОГО РАЗВИТИЯ НАУКИ. – 2021. – С. 27-31.
  12. Tovashov R. X., Safarov F. S., Maxamov A. U. Theoretical justification of parameters of backrest of antique chair. – 2022.
  13. Mirzaev B. et al. Combined machine for preparing soil for cropping of melons and gourds IOP Conference Series: Earth and Environmental Science, 403 DOI: 10.1088. – 1755-1315/403/1, 2019. – Т. 12158.
  14. Алдошин Н.В., Маматов Ф.М., Исмаилов И.И., Тавашов Р.., Васильев А.С. Обработка почвы и посев зерновых культур на склоновых полях. Агроинженерия. 2023;25(3):30-34. https://doi.org/10.26897/2687-1149- 2023-3-30-34
  15. Xo‘jaxmat o‘g‘li, T. R. . (2023). Nishabli Dalalarga Ishlov Beradigan Va Don Ekadigan Mashinaning O‘Rkach Hosil Qilgichining Harakat Yo‘Nalishiga Nisbatan O‘Rnatilish Burchagini Asoslash. Journal of Innovation, Creativity and Art, 2(2), 27–31.

Downloads

Download data is not yet available.