Skip to main navigation menu Skip to main content Skip to site footer

Vol. 12 No. 09 (2025)
International Multidisciplinary Journal for Research & Development

Articles

INTEGRATING CIRCULAR ECONOMY PRINCIPLES IN ELECTRIC VEHICLE AND CONSTRUCTION SECTORS: A COMPREHENSIVE FRAMEWORK FOR SUSTAINABLE BUSINESS MODELS

Published 2025-09-30

  • John A. Thompson

John A. Thompson
Department of Sustainable Business Studies, University of Manchester, United Kingdom

Abstract

The transition towards a circular economy represents a paradigm shift in contemporary business and industrial practices, aiming to replace traditional linear models of production and consumption with regenerative and restorative systems. This study critically examines the integration of circular economy principles within the electric vehicle (EV) battery value chain and the construction sector, emphasizing the development and implementation of circular business models (CBMs). By synthesizing insights from multidisciplinary literature, the research investigates theoretical underpinnings, operational enablers, and the barriers associated with circular transitions. The study employs a qualitative, theory-driven methodology, combining systematic literature review, stakeholder analysis, and conceptual mapping to construct an integrative framework for circular business model design. Findings highlight the significance of traceability mechanisms, multi-stakeholder collaboration, and value proposition alignment in fostering sustainable outcomes across both sectors. Additionally, the research identifies consumer behavior, institutional voids, and regulatory contexts as critical determinants influencing the adoption and scalability of CBMs. The discussion elaborates on the implications of circular transitions, including economic, environmental, and social dimensions, while acknowledging limitations related to data availability and generalizability. Finally, the study proposes directions for future research, emphasizing empirical validation of circular strategies, cross-sectoral knowledge transfer, and the development of competency frameworks for practitioners. The outcomes provide a comprehensive theoretical and practical guide for policymakers, industry leaders, and researchers seeking to operationalize circular economy principles in complex industrial ecosystems.

Keywords

Circular economy, electric vehicles, construction industry

PDF

References

  1. Agrawal, T. K., Angelis, J., Thakur, J. R., Wiktorsson, M., & Kalaiarasan, R. (2021). Enabling circularity of electric vehicle batteries-the need for appropriate traceability. 2021 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD), Marrakech, Morocco. https://doi.org/10.1109/ICTMOD52902.2021.9739531
  2. Asare, M. (2015). Using the theory of planned behavior to determine the condom use behavior among college students. American Journal of Health Studies, 30(1), 43–50. https://doi.org/10.47779/ajhs.2015.168
  3. Bigliardi, B., Campisi, D., Ferraro, G., Filippelli, S., Galati, F., & Petroni, A. (2020). The intention to purchase recycled products: Towards an integrative theoretical framework. Sustainability, 12, 9739. https://doi.org/10.3390/su12229739
  4. Bocken, N. M. P., De Pauw, I., Bakker, C., & Van Der Grinten, B. (2016). Product design and business model strategies for a circular economy. Journal of Industrial and Production Engineering, 33, 308–320. https://doi.org/10.1080/21681015.2016.1172124
  5. Bocken, N. M. P., Rana, P., & Short, S. W. (2015). Value mapping for sustainable business thinking. Journal of Industrial and Production Engineering, 32(1), 67–81. https://doi.org/10.1080/21681015.2014.1000399
  6. Brown, H.S., Vergragt, P.J., Green, K., & Berchicci, L. (2004). Bounded socio-technical experiments (BSTEs): higher order learning for transitions towards sustainable mobility. In B. Elzen, F. Geels, & K. Green (Eds.), System innovation and the transition to sustainability (pp. 191–219). Edward Elgar, Cheltenham.
  7. Brown, P., Bocken, N., & Balkenende, R. (2018). Towards Understanding Collaboration Within Circular Business Models. In L. Moratis, F. Melissen, & S. O. Idowu (Eds.), Sustainable Business Models Principles, Promise, and Practice (pp. 169-201). Springer, Cham. https://doi.org/10.1007/978-3-319-73503-0_9
  8. Centobelli, P., Cerchione, R., Chiaroni, D., Vecchio, P. D., & Urbinati, A. (2020). Designing business models in circular economy: A systematic literature review and research agenda. Business Strategy and the Environment, 29(4), 1734–1749. https://doi.org/10.1002/bse.2466
  9. Kanther, S. D. (2025). Integrating circular business models in construction: A framework for design and planning to enhance sustainability. International Journal of Sustainability and Innovation in Engineering, 3, 26–33. https://doi.org/10.56830/IJSIE202502
  10. Chirumalla, K., Reyes, L. G., & Toorajipour, R. (2022). Mapping a circular business opportunity in electric vehicle battery value chain: A multi-stakeholder framework to create a win–win–win situation. Journal of Business Research, 145, 569–582. https://doi.org/10.1016/j.jbusres.2022.02.070
  11. Cho, N., El Asmar, M., & Aldaaja, M. (2022). An Analysis of the Impact of the Circular Economy Application on Construction and Demolition Waste in the United States of America. Sustainability, 14, 10034. https://doi.org/10.3390/su141810034
  12. EMF (Ellen MacArthur Foundation). (2015). Towards the Circular Economy: Business rationale for an accelerated transition. Greener Management International, 20(3), 3.
  13. Fernandes, S. d. C., Pigosso, D. C. A., McAloone, T. C., & Rozenfeld, H. (2020). Towards product-service system oriented to circular economy: A systematic review of value proposition design approaches. Journal of Cleaner Production, 257, 120507. https://doi.org/10.1016/j.jclepro.2020.120507
  14. Geissdoerfer, M., Savaget, P., Bocken, N.M., & Hultink, E.J. (2017). The Circular Economy–A new sustainability paradigm? Journal of Cleaner Production, 143, 757–768. https://doi.org/10.1016/j.jclepro.2016.12.048
  15. Górecki, J., Núñez-Cacho, P., Corpas-Iglesias, F.A., & Molina, V. (2019). How to convince players in construction market? Strategies for effective implementation of circular economy in construction sector. Cogent Engineering, 6, 1690760. https://doi.org/10.1080/23311916.2019.1690760
  16. Guerra, B.C., & Leite, F. (2021). Circular economy in the construction industry: An overview of United States stakeholders’ awareness, major challenges, and enablers. Resources, Conservation and Recycling, 170, 105617. https://doi.org/10.1016/j.resconrec.2021.105617
  17. Han, D., Konietzko, J., Dijk, M., & Bocken, N. (2022). How do companies launch circular service business models in different countries? Sustainable Production and Consumption, 31, 591–602. https://doi.org/10.1016/j.spc.2022.03.011
  18. Islam, M. T., & Iyer-Raniga, U. (2023). Circular Business Model Value Dimension Canvas: Tool Redesign for Innovation and Validation through an Australian Case Study. Sustainability, 15, 11553. https://doi.org/10.3390/su151511553
  19. Islam, M.T., Islam, M. T., Huda, N., Baumber, A., Shumon, R., Zaman,

Downloads

Download data is not yet available.