STUDY OF THE PHYSICAL AND MECHANICAL PROPERTIES OF RIGID POLYURETHANE FOAMS OBTAINED ON THE BASIS OF SYNTHESIZED PRODUCTS

Authors

Gubaydullin Rinat Shavkatovich Assistant, Department of Medical Chemistry of the Andijan State Medical Institute, Andijan, Uzbekistan

Keywords:

secondary raw materials, tertiary amines, catalysts, physical and mechanical properties, IR spectrum, density, freon.

Abstract

This article presents the physical and mechanical properties of rigid polyurethane foams. Specifically, the properties of five rigid polyurethane foam samples obtained are compared with those of the standard PPU-307 formulation. Impact properties, strength properties, water absorption, and flammability are compared. Based on these data, a sample with acceptable physical and mechanical properties was selected.

Downloads

Download data is not yet available.

References

R. Van Maris, Y. Tamano, H. Yoshimura, and K. M. Gay, “Polyurethane catalysis by tertiary amines,” J. Cell. Plast., vol. 41, no. 4, pp. 305–322, 2005.

Gafarov A.M., Punegina L.N., Loginova N.I., Novikova S.S., Titov N.K. Condensation of monoethanolamine with formaldehyde. Izv. AN USSR, 1978, No. 9, p. 2189

Gubaydullin R.Sh., Alimukhamedov M.G., Adilov R.I. Study of the reaction products of diethanolamine with furfural by IR spectroscopy // Universum: chemistry and biology: electronic scientific journal. 2021. 1(91).

Gubaydullin R.Sh., Alimukhamedov M.G., Adilov R.I. Development of an optimal formulation of rigid polyurethane foams based on reaction products of diethanolamine and furfural // Universum: technical sciences: electronic scientific journal. 2024. 1(118).

Gubaydullin R.Sh., Alimukhamedov M.G., Adilov R.I. Development of rigid polyurethane foam compositions based on synthesized furfurylamino diethanol // Technology of organic substances: Proc. of the 88th scientific and technical. conf. of the faculty, researchers and graduate students, Minsk, January 29 – February 16, 2024 / ed. I.V. Voitov. - Minsk: BSTU, 2024. - 442 p.

D. Klempner and K. C. Frisch, Handbook of Polymeric Foams and Foam Technology. New York: Hanser, 1991

DVWM de Vries, “Characterization of polymeric foams,” Eindhoven Univ. Technol., no. July, pp. 3–34, 2009.

A. Baroutaji, A. Arjunan, A. Niknejad, T. Tran, and A.-G. Olabi, Application of Cellular Materials in Crashworthiness Applications: An Overview. Elsevier Ltd., 2019.

JG Drobny, Processing Methods Applicable to Thermoplastic Elastomers. Handbook of Thermoplastic Elastomers (Second Edition), William Andrew Publishing, p. 33-173, 2014.

M. Kelly, H. Arora, and J. P. Dear, “The comparison of various foam polymer types in composite sandwich panels subject to full scale air blast loading,” Procedia Eng., vol. 88, pp. 48–53, 2014.

Downloads

Published

2026-04-03

How to Cite

Gubaydullin Rinat Shavkatovich. (2026). STUDY OF THE PHYSICAL AND MECHANICAL PROPERTIES OF RIGID POLYURETHANE FOAMS OBTAINED ON THE BASIS OF SYNTHESIZED PRODUCTS. International Multidisciplinary Journal for Research & Development, 13(4), 66–70. Retrieved from https://www.ijmrd.in/index.php/imjrd/article/view/5497