Skip to main navigation menu Skip to main content Skip to site footer

Vol. 11 No. 11 (2024)
International Multidisciplinary Journal for Research & Development

Articles

JUSTIFICATION OF THE CONNECTION SCHEME OF THE SEALING ROLLER WITH THE DEVICE FRAME

Published 2024-11-20

  • Abdualiev Nuriddin Khabibovich

Abdualiev Nuriddin Khabibovich
Head of the Department of General Technical Disciplines, Ph.D. (PhD) Bukhara Institute of Natural Resources Management, National Research University, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers

Abstract

The article presents the connection diagrams of the sealing roller with the frame of the device, which are based on expressions characteristic of the circuits. These connection diagrams serve as the basis for ensuring the required shape and density of the fallen soil using a roller. In addition, recommendations are given for optimizing the communication scheme.

Keywords

cotton seedlings, watering, fallen soil shape, soil deformation, sealing roller, floor sealing, communication scheme, horizontal effect of the reaction force acting on the roller from the soil, the pressure of the roller on the soil

DOWNLOAD PDF CERTIFICATE

References

  1. Singh S.P., Solanki R.C., Singh M.K. and Singh K. Development of tractor operated bund former-cum-packer for increasing resource productivity / Indian Journal of Agricultural Sciences. – 2016. № 86 (9). – рр 21–26.
  2. Kh, O. K., Murodov, N. M., Murtazoev, A. N., & Kh, A. N. (2019). Found parameters of the construction of longitudinal pawl-creating device between cotton rows. International journal of advanced research in science, engineering and technology (IJARSET), 6(1), 7885-7887.
  3. Абдуалиев, Н. Ҳ. (2016). Обоснование параметров устройства для осуществления продольного пала в междурядьях хлопчатника. Магистерская диссертация.–2016.-65с.
  4. Абдуалиев, Н. Х., УмирзоКов, Ж. У. У. К., & ХАкимов, К. З. (2022). Внедрение устройства для образования продольного пала с оснащённого уплотнительным катком при междурьядях хлопчатника. наука и инновации в xxi веке: актуальные вопросы, открытия и достижения, 50-53.
  5. Abdualiev, N. K. (2022, December). Justification of the design parameters of the compaction roller for creating longitudinal boards in the rows of cotton. In Journal of Physics: Conference Series (Vol. 2388, No. 1, p. 012176). IOP Publishing.
  6. Murodov, N., Abdualiev, N., & Murtazoev, A. (2020, July). Device for forming longitudinal thresholds among rows of improved porosity. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012180). IOP Publishing.
  7. Аваздурдиев Т. Исследование и обоснование параметров уплотнителя почвенных валиков, нарезаемых при промывных поливах: Автореферат – дис. … канд. тех. наук. – Ташкент, 1976. 9 с.
  8. Habibovich, A. N. (2022). Determination of the cross-sectional area of the threshold between rows of cotton.
  9. Тухтакузиев А., Мансуров М., Каримова Д. Научно-технические решения обеспечения устойчивости глубины работы почвообрабатывающих машин, рабочие органы которых подвижно прикреплены к раме. Монография - Ташкент, 2019. Общая страница 84. - С. 37-38.

Downloads

Download data is not yet available.