DEVELOPMENT OF WORM GEAR DESIGN WITH COMPOSITE ELASTIC ELEMENT AND JUSTIFICATION OF ITS PARAMETERS

Authors

Mukhsiddinov Jaloliddin Rukhiddin ugli, Abduvakhobov Dilshod Abduvakhidovich, Djuraev Anvar Djuraevich Namangan State Technical University, Doctoral student, Namangan State Technical University, PhD, Associate Professor, Tashkent Institute of Textile and Light Industry, Doctor of Technical Sciences, Professor

Keywords:

worm gear, elastic element, composite structure, vibration, dynamic loads, calculation methodology, efficiency.

Abstract

This article discusses the development of a new design of a worm gear with a composite elastic element and the calculation of its main parameters. The necessity of using elastic elements in worm gears to reduce vibration and shock loads, reduce noise levels and increase service life is substantiated. The optimal structure of the composite elastic element and its geometric parameters are analyzed. A calculation methodology is proposed to determine the main characteristics of the transmission - power, torque, efficiency and load capacity. Based on numerical experiments, the advantages of the composite elastic element design over traditional worm gears have been proven.

Downloads

Download data is not yet available.

References

Kudryavtsev V.N., Derjavin Yu.A., Glukharev E.G. Design and calculation of toothed gears. – M.: Mashinostroenie, 2020. – 558 p.

Ginzburg E.G., Golovanov N.F., Firun N.B. Worm gears. – L.: Mashinostroenie, 2018. – 211 p.

Petrusevich A.I., Genkin M.D. Dynamics of gears. – M.: Nauka, 2019. – 263 p.

Erikhov M.L. Worm gears with elastic elements // Vestnik mashinostroeniya. – 2021. – No. 5. – P. 15-22.

Zagorodniy K.I., Ivanov S.P. Vibration isolation in mechanical transmissions. – M.: Mashinostroenie, 2020. – 187 p.

Litvin F.L., Fuentes A. Gear Geometry and Applied Theory. – Cambridge University Press, 2021. – 800 p.

Kahraman A., Singh R. Non-linear dynamics of a geared rotor-bearing system with multiple clearances // Journal of Sound and Vibration. – 2020. – Vol. 144(3). – P. 469-506.

Dooner D.B. Kinematic Geometry of Gearing. – Wiley, 2022. – 512 p.

Simon V. Optimal tooth modifications in hypoid gears // Journal of Mechanical Design. – 2021. – Vol. 127(4). – P. 646-655.

Downloads

Published

2026-02-13

How to Cite

Mukhsiddinov Jaloliddin Rukhiddin ugli, Abduvakhobov Dilshod Abduvakhidovich, Djuraev Anvar Djuraevich. (2026). DEVELOPMENT OF WORM GEAR DESIGN WITH COMPOSITE ELASTIC ELEMENT AND JUSTIFICATION OF ITS PARAMETERS. International Multidisciplinary Journal for Research & Development, 13(02), 392–395. Retrieved from https://www.ijmrd.in/index.php/imjrd/article/view/5080